Heating-Clean and Tunes

Planned Maintenance Agreement | Please call us anytime for pricing. 716.496.5037

Benefits of Planned Maintenance on Your Equipment




Plan A: Gas or Electric Furnace or Boiler

  1. Clean and adjust automatic controls.
  2. Clean burners.
  3. Adjust combustion for optimum fuel efficiency.
  4. Lubricate as needed.
  5. Test for combustion leaks.
  6. Test safety shutoff response.
  7. Check blower belt wear, tension, and alignment.
  8. Replace 1" throw away air filter if applicable.
  9. Replace thermocouple.
  10. Check flue for satisfactory operation.
  11. (other media filters billed extra)

Plan B: Oil Furnace or Boiler

  1. Clean and adjust automatic controls.
  2. Clean and adjust draft regulator and firing assembly.
  3. Adjust combustion for optimum fuel efficiency.
  4. Lubricate as needed.
  5. Check for combustion leaks.
  6. Test safety shutoff response.
  7. Brush and vacuum combustion area.
  8. Replace oil nozzle.
  9. Replace oil filter at fall inspection.
  10. Check flue for satisfactory operation.

Oil Furnace-in addition to above

  1. Check blower belt wear, tension, and allignment.
  2. Replace 1" throw away air filter if applicable.
  3. (Other media filters billed extra)

Plan C: Air Conditioner

  1. Clean condenser coil if necessary.
  2. Check electric connections for tightness.
  3. Adjust system for optimum cooling.
  4. Check for oil and refrigerant leaks.
  5. Check safety devices.
  6. Check blower belt wear, tension, and alignment.
  7. Check expansion valve and coil temperature.
  8. Replace 1" throw away air filter if applicable.
  9. Replace refrigerant level.
  10. Check condensate drain.
  11. Lubricate as needed.
  12. (Other media filter billed extra)

Plan D: Air Cleaner

  1. Clean and service electronic air cleaner.

Plan E: Humidifier or Dehumidifier

  1. Clean and service humidifier.
  2. (Pads billed extra)

Plan F: Hot Water Heater

  1. Clean and service hot water heater.
  2. Replace thermocouple.
  3. Drain heater.

Oil Water Heater-in addition to above items

  1. Replace oil nozzle.
  2. Brush and vacuum combustion area.
  3. Oil filter.
  4. Spray and Oil